Kemppi MIG 2520 - Manual (Page 9)

Kempact mig 50 / 0635 – © Kemppi oy
4. MAINTENANCE
4.1. DAILY MAINTENANCE
Be careful of mains voltage when handling electric cables!
Clean the wire channel of the electrode and check the contact tip regularly. Always check the
condition of the mains and welding cable before operation and replace defective cables.
Note! Only a competent electrician is allowed to remove or install the mains cable!
4.2. REGULAR MAINTENANCE
KEMPPI –service workshops sign special service contracts with customers for regular maintenance.
All parts are cleaned, checked and if necessary, repaired. Also the operation of the welding machine
is tested.
5. ORDERING INFORMATION
Item Ordering number
Kempact MIG 2520 6218520
GH 30 Gun holder 6256030
Feed roll 0.6-0.8 V-groove 9483070
Feed roll 0.8-1.0 V-groove 9483071
Feed roll 1.0-1.2 U-groove 9483072
Feed roll 0.8-0.9 V-groove, knurled 9483073
Feed roll 1.0-1.2 V-groove, knurled 9483074
Feed roll 1.0-1.2 V-groove 9483075
MMT 25 3 m 6252513MMT
MMT 25 4,5 m 6252514MMT
MMT 27 3 m 6252713MMT
MMT 27 4,5 m 6252714MMT
Earth cable 35 mm² 5 m 6184311
Transport unit ST 7 6185290
Transport unit P250 6185268
Lift hook 4298180
Gas hose 6m W000566
Front quide tube orange 0.9-1.6 mm Ss W000431
Front quide tube white 0.6-0.8 mm Fe, Mc, Fc W000451
Front quide tube silver 0.8-1.6 mm Al W000449
The unit fulfils the CE marking demands.