Kemppi MIG 2520 - Manual (Page 10)

10 – Kempact mig 50 / 0635 © Kemppi oy
6. TECHNICAL DATA
kempact Mig 2520
Mains connection 3~400V +/-15%, 50/60hz
Connected load 40% ED 12 kVa 250a
60% eD 10 kVa 207a
100% eD 7,5 kVa 160a
Mains cable/fuse 4x1,5mm²-5m/16a delayed
Load capacity 40% eD 250a /26,5V
60% eD 207a /24V
100% eD 160a /22V
Adjustment range 10 - 30V
Wire feed speed 1 - 18 m/min
Idle voltage 40-50 V
Power ratio 0,64 (250a / 26V)
Efficency 0,87 (250a / 26V)
Wires with filler fe, ss Ø 0,6 ... 1,0 mm
Cored wire Ø 0,9 ... 1,2 mm
al Ø 0,9 ... 1,2 mm
Cusi Ø 0,8 ... 1,0 mm
Shielding gas Co², ar, ar & Co² mixed
gases
Wire reel diameter 200 mm (5 kg)
Thermal class h(180C) / b (130C)
Measurements l510 x W250 x h415
Weight 17,5 kg
Range of temperature for
use
-20C ... +40C
Storage temperature for use -40C ...+60 C
Degree of protection IP23C
7. DISPOSAL OF THE MACHINE
Do not dispose of electrical equipment together with normal waste!
In observance of European Directive 2002/96/EC on Waste Electrical and Electronic
Equipment and its implementation in accordance with national law, electrical equipment
that has reached the end of its life must be collected separately and returned to an
environmentally compatible recycling facility. As the owner of the equipment, you should
get information on approved collection systems from our local representative.
By applying this European Directive you will improve the environment and human
health!