Kemppi Procool 10 - Manual (Page 3)

Procool 10/0109 – 3 ©
COPYRIGHT KEMPPI OY
W2
W1
b
a
W1
H1
H2
S1
1. PREFACE
1.1. INTRODUCTION
Congratulations on having purchased this product. Properly installed Kemppi products should
prove to be productive machines requiring maintenance at only regular intervals. This manual
is arranged to give you a good understanding of the equipment and its safe operation. It also
contains maintenance information and technical specifications. Read this manual from front to
back before installing, operating or maintaining the equipment for the first time. For further
information on Kemppi products please contact us or your nearest Kemppi distributor.
The specifications and designs presented in this manual are subject to change without prior
notice.
In this document, for danger to life or injury the following symbol is used:
Read the warning texts carefully and follow the instructions. Please also study the Operation
safety instructions and respect them when installing, operating and servicing the machine.
1.2. PRODUCT INTRODUCTION
Cooling liquid unit Procool 10 for KEMPPI PRO is designed for cooling MIG welding guns and
TIG welding torches in demanding professional use.
Operation of Procool 10 is controlled with microprocessor.
Device assemblies being suitable for various welding methods as well as operating instruction
has been described in manual for each unit. This manual handles installation and use of Procool
cooling liquid unit.
1.2.1. Operation control and connectors
H1 Warning lamp for thermal
shield
H2 Signal lamp for pressure
guard
S1 I/O main switch with
signal lamp
S2 Test/fill switch
W1 Mains connecting cable
W2 Control cable
a
Cooling liquid connection
Supply R 3/8
b Cooling liquid connection
Return R 3/8
c Filler hole for liquid tank
d Control opening for liquid level