Kawai ATX2-p - Manual (Page 21)

21
G
e
ner
a
l Oper
a
tion
The MIDI Channel function is used to determine on which MIDI channel the AnyTimeX2 piano will exchange
MIDI information with external MIDI devices and instruments.
The selected channel will function as both the Transmit and Receive channel.
 Activating Setting Mode
While holding the Soft pedal, press and
hold the top-most ‘C’ key (C8 key) Release the Soft pedal,
then release the ‘C’ key Depress the Soft pedal
The above combination of holding the Soft pedal while pressing the top-most ‘C’ key will activate Setting Mode.
 Adjusting MIDI Channel
Press white C3 to D5 keys to adjust the MIDI channel.
Please refer to the table below for a list of MIDI channels and the respective key assignments.
MIDI channel (OMNI OFF)
OMNI ON 1ch
Key C3 D3 E3 F3 G3 A3 B3 C4 D4 E4 F4 G4 A4 B4 C5 D5
MIDI Channel 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16
* The MIDI channel can be adjusted within the range of 1-16.
* Press black C#3 key to allow MIDI information to be received from all channels.
This is often referred to as ‘OMNI ON’. If, a specifi c MIDI channel is selected, the AnyTimeX2 piano will be set to ‘OMNI OFF’ and data will only be
received on that specifi ed channel.
 Deactivating Setting Mode
After adjusting the desired MIDI channel settings, depress the Damper pedal to deactivate Setting Mode.
* The MIDI channel setting will be set to ‘OMNI ON 1ch’ automatically when the power is turned on.