Kawai ATX2-p - Manual (Page 11)

11
G
e
ner
a
l Oper
a
tion
General Operation
This section explains how to combine keyboard and pedal presses to select diff erent sounds, change reverb
settings, and adjust various other settings of the AnyTimeX2 piano.
1. Selecting Sounds 4. Tuning 7. MIDI Channel
2. Reverb Type 5. Transpose 8. Local Control
3. Damper Resonance 6. Metronome 9. Auto Power Off
* The following illustrations display the keys assigned to adjusting various settings of the AnyTimeX2 piano.
MIDI Send/Receive Channel Transpose Metronome Tuning
Auto Power Off
Reverb Type Damper Resonance Local Control
Sound Selection MIDI Send/Receive Channel
* Pressing one of the keys indicated in the above illustrations while ‘Setting Mode’ is activated will allow various settings of the AnyTimeX2 piano to be
adjusted. During ‘Setting Mode', no sound will be produced when pressing one of those keys, with the exception of the keys used for adjusting the
Metronome, which will produce a metronome sound when pressed.
* Pressing keys which are not indicated in the above illustrations will produce the currently selected sound. These keys allow changes to the sound to
be heard as they are made.