Operation instructions, Mowing with a mulching attachment – Dixon SpeedZTR 968999545 User Manual
Page 26
OPERATION INSTRUCTIONS
26
MOWING WITH A MULCHING ATTACHMENT:
Mulching or recycling the grass clippings requires a
totally different mowing approach than would be normal
when side discharging or bagging the grass. There may
be instances or conditions where it is not possible to
hide all the recycled or mulched clippings.
In order to achieve the best results, please read and
follow the mulching tips listed below:
1. Read and follow the installation instructions that are
included with your mulcher.
2. Set the engine speed control to the wide open or full
setting.
3. Place the mower deck cut height selector in either
the top or second notch. Never cut more than
¾" (19 mm) to 1" (25mm) off the grass at any one
time. Attempting to cut more grass will result in the
deck plugging and cause the engine to stall.
4. It may be necessary to cut the lawn twice to achieve
acceptable mulching performance especially on first
cuttings or if the lawn is heavily fertilized.
5. Do not attempt to cut grass when it is wet. Mulching
performance will be very poor in wet grass
conditions.
6. Maintain sharp blades throughout the cutting
season. This is very important. Optimal mulching
performance cannot be obtained with a dull or
nicked blade.