Dixon SpeedZTR 968999545 - Manual (Page 17)

SPECIFICATIONS
17
11 gauge welded steel tubular frame
Body parts are made of steel
11 gauge stamped steel construction. Single 30"
(76 cm) cut blade. Cut height approximately 1½
"
(38mm)- 4 " (102 mm) via seven position foot
pedal.
Mechanical; hand lever engagement.
Each rear wheel is independently driven by a
Hydro Gear EZT self contained hydrostatic drive.
13 HP Briggs & Stratton Intek, 4-cycle, single
cylinder, air-cooled, gasoline, vertical shaft,
aluminum head and block, cast iron sleeve, AVS
balanced.
Electric-key switch operation with safety interlocks
on park brake, steering levers and blade drive.
Front 11 x 4.00-5 smooth tread 16-21 PSI
(110-145 kPa)
Rear 18 x 6.50-8 turf tread 8-14 PSI
(55-97 kPa)
Fuel 1.8 gallon (6.8 liters)
Engine Oil 1.25 quarts (1.2 liters)
Width 34 " (86 cm) outside rear wheel
measurement
Width 40 " (101 cm) overall width of
deck with deflector
Height 38 " (96 cm) to top edge of seat
Length 67 " (170 cm) hitch tab to front
Weight 470 lbs. (213 kg)
Additional information may be provided elsewhere in this manual.
SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE
Chassis:
Body:
Mower Deck:
Blade Drive:
Transmission:
Engine:
Starting
System:
Tires:
Capacities:
Dimensions:
SpeedZTR™ 30