Dixon SpeedZTR 968999545 - Manual (Page 24)

OPERATION INSTRUCTIONS
24
TESTING OF SAFETY INTERLOCK SYSTEMS:
The following tests should be performed at the start of
each mowing day.
PARK BRAKE SWITCH TEST:
1. Swing control levers to outward position.
2. Disengage blade drive.
3. Put park brake in OFF position.
4. Turn ignition switch to START.
Engine should not turn over or attempt to start.
CONTROL LEVER SWITCH TEST:
1. Disengage blade drive.
2. Put park brake in ON position.
3. Swing control levers inward.
4. Turn ignition switch to START.
Engine should not turn over or attempt to start.
NOTE: If any safety check fails, do not operate the mower until
the system has been checked and repaired by an
authorized Dixon dealer.
WARNING
!
Failure to observe the following instructions
could result in serious injury or death.