JLCooper sBOX8D - Manual (Page 14)

The Bank Button on the front panel of the sBOX can determine the
behavior of the large buttons on the sBOX.
By default, the sBOX GPI Outputs can be selected by the Bank button on
the left side of the front panel. Using the rear panel DIP switches, the
sBOX can be configured to control a specific bank of 8 GPI Outputs.
Using the rear panel DIP switches, the sBOX can be configured to
control/view a specific bank of 8 GPI Outputs. In this setting, the Bank
Button has no effect.
Location of Bank Button on sBOX8R
Note: The labels shown in the buttons are for illustrative purposes and are
not included with the unit.
sBOX
Mode
DIP
SW1
DIP
SW2
DIP
SW3
Bank 1-8, 9-16, 17-24* Down Down Down
Bank 1-8 Up Down Down
Bank 9-16 Down Up Down
Bank 17-24 Up Up Down
Bank 25-32, 33-40, 41-48* Down Down Up
Bank 25-32 Up Down Up
Bank 33-40 Down Up Up
Bank 41-48 Up Up Up
sBOX Operational Mode Configuration for gBOX sBOX Operational Mode Configuration for gBOX sBOX Operational Mode Configuration for gBOX sBOX Operational Mode Configuration for gBOX
* This mode allows the Bank button to select the bank of GPIs to
control. * This mode allows the Bank button to select the bank of GPIs to
control. * This mode allows the Bank button to select the bank of GPIs to
control. * This mode allows the Bank button to select the bank of GPIs to
control.
14