beautypg.com

JLCooper Gangway16 User Manual

Page 8

background image

8

selected configuration and illuminate the selected Group Select
button.

Notes:
The Group Select buttons are disabled when the Tally Select is lit.
The state of the Front Panel Enable LED is not stored.
The All button is turned off.


Enable
The Enable button selects the front panel controller port. If the
Enable button is illuminated, the Gangway16 uses the front panel
controller port. If the Enable button is extinguished, the
Gangway16 uses the rear panel controller port.

See also other documents in the category JLCooper Equipment: