JLCooper Gangway16 - Manual (Page 6)

6
Connecting the Gangway16
Connecting the Gangway16 is quite straightforward. The
Gangway16 typically connects between one or two controller(s)
and up to 16 slave devices as shown in the following diagram.
Connect your deck controller into the Controller port on the rear
panel. Alternately, your deck controller can be plugged into the
Controller port on the front panel if it is more convenient. In this
case, make sure the front panel Enable button is illuminated.
Connect your slave devices to the numbered ports on the rear
panel. You can connect up to 16 slave devices to the Gangway16.