JLCooper SX Midnight Eclipse User Manual
Page 15
15
Troubleshooting
If for some reason the EclipseSX does not give you the expected
results, take a moment to do some investigating. The most
important concept is that you have your EclipseSX connected
properly as outlined in Installation and Use. Take a moment to
double check your setup.
A common problem is forgetting to turn the power switch on or
turning the unit on after the software application has launched.
contain up to date information on drivers, applications and
troubleshooting.
If all else fails, you can contact the JLCooper Service Department
at: [email protected].
Care and Service
If properly cared for, your EclipseSX should provide years of
troublefree performance. While the EclipseSX is built in a rugged
metal enclosure, please avoid dropping the EclipseSX.
Clean with a soft, damp cloth. Do not allow liquids, dust or other
foreign matter to get inside the unit.
There are no user-serviceable parts in the EclipseSX. Please refer
to the JLCooper Electronics Limited Factory Warranty on the
following page for detailed warranty and service information
Configuring the Host Application
Now that the IP settings of the Eclipse SX have been set, the host
application must be configured to connect to the Eclipse SX.
To configure Apple Color to connect to the Eclipse SX, refer to
Appendix C, “Setting Up a Control Surface“ in the Apple Color
User Manual.