JLCooper SX Midnight Eclipse - Manual (Page 12)

MCS-3000 Series Ethernet Interface Card
The Ethernet Interface is intended for operation with a host
computer. It provides the advantages of a standard interface, long
cable runs, use over private/public/wired/wireless networks, the
ability of being shared among computers and the ability to work
with any platform that supports TCP/IP.
To use the Ethernet Interface, the software application MUST be
written to specifically support the Ethernet Interface. Consult your
software’s users documentation for details on how to configure the
software.
To configure the EclipseSX Ethernet settings, an Ethernet Interface
card must be in slot 1. You can verify this by visually checking
slot 1 for the presence of an Ethernet card.
To set the IP address, press Page4 + Page8 to access the
configuration page. The right display will show:
3J3J3J
0DVN,3$GG([LW
Press Page7 to set the IP Address and TCP Port Number of the
EclipseSX.
12