Jetway Computer ADMPEOX4CA - Manual (Page 19)

18
3. JP2 (only for PCB ver: 0.2): Panel backlight power on/off (3-pin)
1-2 closed: OFF
2-3 closed: ON
Note: JP2 only for PCB rev: 0.2 please check the character which below the
COM4 connector it has “V:0.2”, if it is “V:0.1” did not have JP2 connector
4. LCD (32 Pin): 24-bit LVDS header
24-bit LVDS Header
Pin 1
2, 4, 6, 8,10 …….. 32
1, 3, 5, 7,9 …….. 31
2-3 closed : backlight on
JP2
1
2
JP2
1
3
1-2 closed: backlight off