Jetway Computer NC9C - Manual (Page 37)

32
3-11 Miscellaneous Control
Spread Spectrum
The optional settings are: Enabled; Disabled.
Linear PCIEX Clock
The optional settings are from 100 to 200.
DRAM Clock at Next Boot
This item allows you to set DRAM clock. The optional settings are: Auto; 667MHz;
800MHz.
Host/PCI Clock at Next Boot
The optional settings are from 166 to 600.
3-12 Password Setting
You can set either supervisor or user password, or both of them. The differences
are:
Supervisor password:
Can enter and change the options of the setup menus.
User password: Can only enter but do not have the right to change the options