Jetway Computer NC9C - Manual (Page 31)

26
The optional settings are: 1GD; PCI/IGD. Select which graphic controller to use as the
primary boot device.
IGD Mode Select
The optional settings are: Disabled; Enabled, 8MB. Select the amount of system
memory used by the internal graphic device.
LVDS/ADDON-CARD Support
The optional settings are: Disabled; Enabled. The default setting is: Disabled. When
set as Enabled, the following subitems appear:
Boot Display Device
The optional settings are: VBIOS Default; CRT; LVDS/ADDON-CARD; CRT+LVDS.
Flat Panel Type
Use this item to select flat panel resolution.
3-7 Integrated Peripherals
3-7-1 Onboard SATA Function
Configure SATA as
The optional settings are: IDE; AHCI.
SATA Run Mode Configuration
The optional settings are: Compatible; Enhanced.