Jetway Computer NC9C - Manual (Page 35)

30
ACPI Suspend Type
Users can select the ACPI state used for system suspend. The optional settings are:
S1(POS); S3(STR).
Video Power Down Mode
The optional settings are: Disabled; Standby; Suspend.
Suspend Time Out
Use this item to select the specified time for system to go into suspend. The optional
settings are: Disabled;1Min,2 Min;4 Min;8 Min;10 Min;20 Min;30 Min;40 Min;50 Min;60
Min.
Power Button Mode
Use this item to decide whether system go into on/off or suspend when power button
is pressed. The optional settings are: On/Off; Suspend.
ERP (EUP) Function
The optional settings are: Disabled; Enabled.
3-9 PnP/PCI Configurations
IRQ Resources
Names the interrupt request (IRQ) line assigned to the USB on your system. Activity
of the selected IRQ always awakens the system.
PCI/VGA Palette Snoop
This item is designed to overcome problems that can be caused by some
non-standard VGA cards. This board includes a built-in VGA system that does not
require palette snooping so you must leave this item disabled.
3-10 PC Health Status
This section shows the Status of you CPU, Fan, and Warning for overall system status.
This is only available if there is Hardware Monitor onboard.