Jetway Computer NAF91R-G41 - Manual (Page 33)

29
system so the card will function correctly.
3-10 PC Health Status
This section shows the Status of you CPU, Fan, and Warning for overall system
status. This is only available if there is Hardware Monitor onboard.
Shutdown Temperature
This item can let users setting the Shutdown temperature, when CPU temperature
over this setting the system will auto shutdown to protect CPU.
CPU Thermal Throttling
The optional settings are: Disabled; Enabled. When it is set as [Enabled] user could
set value for CPU Thermal-Throttling Temp.; CPU Thermal-Throttling Duty and CPU
Thermal-Throttling Beep.
► Smart Fan Configuration
Press [Enter]to set certain values for the following three items: CPUFAN Smart Mode ,
SYSFAN1 Smart Mode and SYSFAN2 Smart Mode to set respectively for value in
Full-Speed Temp.; Idle Temp. and Idle-Speed Duty .
CPU Temperature/ System Temperature/ /CPUFAN Speed / SYSFAN1 Speed
/SYSFAN2 Speed/ Vcore/NB Core/ 5VSB/DRAM Voltage+5V/+12V/Vcc3V/
3VSB/VBat
This will show the CPU/FAN/System voltage chart and FAN Speed, etc.