Jetway Computer NAF91R-G41 - Manual (Page 26)

22
Date The date from 1 to 31 can be keyed by numeric function keys.
Year The year depends on the year of the BIOS.
System Time
The time format is .
SATA Channel 1/2/3/4 Master
Primary IDE Master/Slave
While entering setup, BIOS auto detects the presence of harddisk devices. This
displays the status of auto detection of harddisk devices.
Type: The optional settings are: Not Installed; Auto; CD/DVD and ARMD.
LBA/Large Mode: The optional settings are Auto; Disabled.
Block (Multi-Sector Transfer): The optional settings are: Disabled and Auto.
PIO Mode: the optional settings are: Auto, 0, 1, 2, 3 and 4.
DMA MODE: the optional settings are Auto, SWDMAn, MWDMAn , UDMAn.
S.M.A.R.T.: This option allows you to enable the HDD S.M.A.R.T Capability
(Self-Monitoring, Analysis and Reporting Technology). The optional settings are Auto;
Disabled; and Enabled.
32 Bit Data Transfer: the optional settings are: Disabled and Enabled.
3-5 Advanced BIOS Features
Intel TXT(LT) Configuration
Press [Enter] to configure Intel TXT(LT) parameters.
Trusted Computing
Press [Enter] to configure settings related to trusted computing innovations.
Virus Warning
The selection Allow you to choose the VIRUS Warning feature for IDE Hard Disk boot
sector protection. If this function is enabled and someone attempt to write data into
this area, BIOS will show a warning message on screen and alarm beep.
Disabled (default) No warning message to appear when anything attempts to
access the boot sector or hard disk partition table.