Jetway Computer NMF91-G41 - Manual (Page 29)

25
Case Open Detect
The optional settings: Disabled; Enabled.
ACPI Suspend Type
Users can select the ACPI state used for system suspend. The optional settings are:
S1(POS); S3(STR).
Video Off In Suspend
Use this item to power down video in Suspend or Standby mode.
Suspend Mode
Use this item to select the specified time for system to go into suspend.
Soft-Off by Power-Button
Use this item to go into On/Off or Suspend when power button is pressed.
ERP Function
The optional settings are: Enabled; Disabled. When set as [Disabled], the following
sub-items shall appear:
Wake-Up by PCIE\LAN S3-S5; Wake-Up by PCI Device; Power On by Ring; Wake
Up by USB from S3(S4); Resume by Alarm.
User can set them as Enabled or Disable for to enable or disable respective functions.
PWR Status after PWR Failure
The optional settings are: Always Off; Always On; Former Status.
Notice! ‘PWR Status after PWR Failure’ is synchronic with ‘ERP Function’.
User need to set ‘ERP Function’ item as [Disabled] for ‘PWR Status
after PWR Failure’ to show up.
3-9 PnP/PCI Configurations
IRQ Resources
Press [Enter] to view IRQ availability.
Available: Specified IRQ is available to be used by PCI/PnP devices.