Jetway Computer NMF91-G41 - Manual (Page 28)

24
Serial Port 1/2/3/4/5/6/7/8/9/10 Address
This item allows BIOS to select base addresses for serial ports.
Serial Port 3/4/5/6/7/8/9/10 IRQ
This item allows BIOS to select serial port IRQ.
Serial Port 2 Mode
The optional settings
are：Normal; IrDA(1.6us); IrDA(3/16 bit).
Serial Port 2 RS485 Select
The optional settings
are：Disabled(RS232); Enabled(RS485).
Parallel Port Address
Use this item to allow BIOS to select parallel port base adresses.
Parallel Port Mode
The optional settings are: Normal; Bi-Directional; ECP; EPP; ECP & EPP.
Watchdog Timer Select
This item is used to activate the watchdog function. The optional settings are: Enabled;
Disabled.
When set as Enabled, The following sub-items shall appear:
z WatchDog Timer Val: User can type a number in the range of 4 to 255.
z WatchDog Timer Unit: The optional settings are: Sec.; Min..
3-8 Power Management Setup
The Power Management Setup allows you to configure your system to most
effectively save energy saving while operating in a manner consistent with your own
style of computer use.
PS2 KB/MS Wake-Up from S3-S5
The optional settings: Disabled; Enabled.