Jetway Computer NF93R - Manual (Page 37)

32
Boot Display:
Select the video Device that will be activated during POST.
3-8 Power Management Setup
The Power Management Setup allows you to configure your system to most effectively save
energy saving while operating in a manner consistent with your own style of computer use.
Phoenix – AwardBIOS CMOS Setup Utility
Power Management Setup
Item Help
PCI Express PM Function Press Enter
ACPI Suspend Type S1(pos)
Run VGABIOS if S3 Resume Auto
Power Management USER Define
Video off Method DPMS
Video off Suspend Yes
Suspend Type Stop Grant
MODEN USE IRQ 3
Suspend Mode Disabled
Soft-off by PWR-BTTN Instant-off
Wake-up by PCI card Disabled
Power on by ring Eabled
USB KB Wake up from S3(S4) Disabled
Resume by Alarm Disabled
Date (of Month) Alarm 0
Time (hh:mm:ss)Alarm 0:0:0
HPET Support Enabled
HPET Mode 32-bit mde
Menu Level >
↑↓→← Move Enter:Select +/-/PU/PD:Value F10:Save ESC:Exit F1:General Help
F5:Previous Values F6:Optimized Defaults F7:Standard Defaults
ACPI Function
This item allows you to Enabled/Disabled the Advanced Configuration and Power
Management (ACPI). The settings are Enabled and Disabled.
Video Off Method
This determines the manner in which the monitor is blanked.