Jetway Computer NF93R - Manual (Page 33)

28
3-5-1 Intel DTS Feature
Phoenix – AwardBIOS CMOS Setup Utility
Intel DTS Feature
Item Help Intel DTS Function Enabled
DTS Active temperature 5 5℃
Passive Cooling Trip Point 95℃
Passive TC1 Value 2
Passive TC2 Value 0
Passive TSP Value 10
Menu Level >
↑↓→← Move Enter:Select +/-/PU/PD:Value F10:Save ESC:Exit F1:General Help
F5:Previous Values F6:Optimized Defaults F7:Standard Defaults
DTS Active Temperature:
This value controls the temperature of the ACPI Active Trip Point- the point in which the os will
turn the CPU on.
NOTE: If the DTS is enabled, only values below 97 ℃ are valid.
Passive Cooling Trip Point:
This value controls the temperature of the ACPI Active Trip Point- the point in which the os will
begin throttling the CPU.
NOTE: If the DTS is enabled, only values below 97 ℃ are valid.
Passive TC1 value:
This value sets the TC1 value for the ACPI passive cooling Formula.
Passive TSP Value:
This item sets the TSP value for the ACPI Passive cooling Formula. It represents in tenths of a
second how often the os will read the temperature when Passive Cooling is Enabled.
Critical Trip Point: