Jetway Computer NF3D - Manual (Page 41)

36
When set as [Enabled], a VMM can utilize the additional hardware capabilities
provided by Vanderpool Technology.
EIST
The optional settings: [Enabled]; [Disabled].
Use this item to enable or disable Intel SpeedStep.
CPU C6 Report
Use this item to enable or disable CPU C6(ACPI C3) status report to OS.
The optional settings: [Disabled]; [Enabled].
CPU C7 Report
Use this item to enable or disable CPU C status report to OS.
The optional settings: [Disabled]; [Enabled].
Package C State limit
The optional settings: [C0]; [C1]; [C3]; [C6]; [C7]; [No Limit].
 SATA Configuration
Press [Enter] to make settings for the following sub-items:
SATA Configuration
SATA Port
The optional settings: [Disabled]; [Enabled].
SATA Mode
The optional settings are: [IDE Mode]; [AHCI Mode].
SATA Speed Support
The item is for user to set the maximum speed the SATA controller can support.
The optional settings are: [Gen1]; [Gen2].
SATA Port1
The optional settings are: [Enabled]; [Disabled].
mSATA/SATA Port2
The optional settings are: [Enabled]; [Disabled].
 Network Stack Configuration
Press [Enter] to go to ‘Network Stack’ screen to make further settings.
Network Stack
The optional settings are: [Enabled]; [Disabled].