Jetway Computer NC9NDL - Manual (Page 36)

31
► Voltage Configuration
DIMM Voltage
The optional settings are: [Default]; [+50mV]; [+100mV]; [+150mV].
► Watchdog Configuration
WatchDog Timer Control
Use this item to enable or disable WatchDog Timer Control. When set as
[Enabled], the following sub-items shall appear:
WatchDog Timer Val
User can set a value in the range of 4 to 255.
WatchDog Timer Unit
The optional settings are: [Second];[Minute].
► Shutdown Temperature Configuration
Use this item to select system shutdown temperature.
► SmartFan Configuration
CPUFAN1 / SYSFAN1/SYSFAN2 SmartFan Mode
When set as [Enabled], the following sub-items shall appear:
CPUFAN1/ SYSFAN1/SYSFAN2 Full Speed Temp
Use this item to set a degree for CPU/SYSFAN1/ SYSFAN2 to run at full speed
when above the specific temperature set.
CPUFAN1 / SYSFAN1/SYSFAN2 Idle Temp
Use this item to set a degree for CPU/SYSFAN1/ SYSFAN2. FAN will idle speed
when below this temperature.
CPUFAN1 / SYSFAN1/SYSFAN2 Stop Temp
Use this item to set a degree for CPU/SYSFAN1/ SYSFAN2. CPU FAN will stop
when below this temperature.