Jetway Computer NC9NDL - Manual (Page 33)

28
Use this item to enable or disable system wake on alarm event. When set as
[Enabled], system will wake on the hour/min/sec specified.
PS2 KB/MS Wakeup
Use this item to enable or disable PS2 KB/MS wakeup function. This function is
only supported when ERP function is set as [Disabled].
PCI PME Wakeup
Use this item to enable or disable S3/S4/S5 PCI PME wakeup. This function is
only supported when ERP function is set as [Disabled].
► CPU Configuration
Hyper-Threading
The optional settings are: [Disabled]; [Enabled].Set as [Enabled] for Windows XP
and Linux (OS optimized for Hyper-Threading Technology) and [Disabled] for
other OS (OS not optimized for Hyper-Threading Technology).
Execute Disable Bit
The optional settings are: [Disabled]; [Enabled].
Limit CPUID Maximum
The optional settings are: [Disabled]; [Enabled].
This item should be set as [Disabled] for Windows XP.
► SATA Configuration
SATA Controller(s)
The optional settings are: [Disabled]; [Enabled].
Configure SATA as
The optional settings are: [IDE]; [AHCI].
► USB Configuration
Legacy USB Support
The optional settings are: [Auto]; [Disabled]; [Enabled].