Jetway Computer NF9C - Manual (Page 44)

39
► WatchDog Configuration
WatchDog Timer Control
Use this item to enable or disable WatchDog Timer Control. When set as
[Enabled], the following sub-items shall appear:
WatchDog Timer Value
User can set a value in the range of 4 to 255.
WatchDog Timer Unit
The optional settings are: [Second];[Minute].
► Shutdown Temperature Configuration
Use this item to select system shutdown temperature.
► PPM Configuration
Use this item to set PPM configuration parameters. Press [Enter] to make settings
for the following sub-items:
EIST
Use this item to enable or disable Intel Speed Step.
CPU C-State Report
Use this item to enable or disable CPUC-state report to OS.
Enhanced C-state
Use this item to enable or disable enhanced CPU C-state.
► SmartFan Configuration
CPUFAN / SYSFAN1/SYSFAN2 SmartFan Mode
When set as [Enabled], the following sub-items shall appear:
CPUFAN / SYSFAN1/SYSFAN2 Full Speed Temp
Use this item to set a degree for CPU/System fan1/ System fan2 FAN will run at
full speed when above the specific temperature set.