Jetway Computer NF9C - Manual (Page 39)

34
Launch External PxE OpROM/Launch LAN1 PXE OpROM
Use this item to enable or disable boot option for legacy network devices.
Launch Storage OpROM
Use this item to enable or disable boot option for legacy mass storage devices with
option ROM.
Onboard LAN 1 Controller
Use this item to enable or disable PCI Express root port 1.
SATA 3.0 Controller
Use this item to enable or disable SATA 3.0 controller.
Configure SATA 3.0 as
Use this item to select an operative mode for SATA 3.0 controller. The optional
settings are: [IDE Mode]; [AHCI Mode].
ERP Function
Use this item to enable or disable ERP function for this board.
► PCI Subsystem Settings
Press [Enter] to enter and make settings for the following sub-items:
PCI ROM Priority
In the case of multiple option ROMs(Legacy and EFI compatible), specifies what
PCI option ROM to launch. The optional settings: [Legacy ROM]; [EFI Compatible
ROM].
PCI Common Settings:
PCI Latency Timer
Use this item to set value to be programmed into PCI latency timer register.
VGA Palette Snoop