Jetway Computer NF9D - Manual (Page 34)

29
► Voltage Configuration
DIMM Voltage
The optional settings are: [Default]; [+50mV]; [+100mV]; [+150mV].
► WatchDog Configuration
WatchDog Timer Control
Use this item to enable or disable WatchDog Timer Control. When set as
[Enabled], the following sub-items shall appear:
WatchDog Timer Value
User can set a value in the range of 4 to 255.
WatchDog Timer Unit
The optional settings are: [Second];[Minute].
► Shutdown Temperature Configuration
Use this item to select system shutdown temperature.
► SmartFan Configuration
CPUFAN1 / SYSFAN1/ SYSFAN2 Smart Mode
When set as [Enabled], the following sub-items shall appear:
CPUFAN1 / SYSFAN1/ SYSFAN2 Full Speed Temp
Use this item to set a degree for CPUFAN/SYSFAN1/SYSFAN2. FAN will run at
full speed when above this temperature.
CPUFAN1 / SYSFAN1/ SYSFAN2 Idle Temp
Use this item to set a degree for CPUFAN/SYSFAN1/SYSFAN2. FAN will idle
speed when below this temperature.
CPUFAN1 / SYSFAN1/ SYSFAN2 Stop Temp
Use this item to set a degree for CPUFAN/SYSFAN1/SYSFAN2. CPU FAN will
stop when below this temperature.