Jetway Computer NF9D - Manual (Page 30)

25
option ROM.
Onboard LAN 1 Controller
Use the above items to enable or disable PCI Express root port 1.
Onboard LAN 2 Controller
Use the above items to enable or disable Mini-PCIE control.
SATA 3.0 Controller
Use the above items to enable or disable SATA 3.0 controller.
Configure SATA 3.0 as
Use this item to select an operative mode for SATA 3.0 controller.
ERP Function
Use this item to enable or disable ERP function for this board. This item should be set
as [Disabled] if you wish to have Active All Wakeup Function.
► PCI Subsystem Settings
Press [Enter] to enter and make settings for the following sub-items:
PCI ROM Priority
In the case of multiple option ROMs(Legacy and EFI compatible), specifies what
PCI option ROM to launch. The optional settings: [Legacy ROM]; [EFI Compatible
ROM].
PCI Common Settings:
PCI Latency Timer
Use this item to set value to be programmed into PCI latency timer register.
VGA Palette Snoop
Use this item to enable or disable VGA palette register snooping.
PERR# Generation
Use this item to enable or disable PCI device to generate PERR#.
SERR# Generation
Use this item to enable or disable PCI device to generate SERR#.