Jetway Computer NF9D - Manual (Page 33)

28
Serial Port
Use this item to enable or disable serial port (COM2).
Change Settings
Use this item to select an optimal setting for super IO device.
Serial Port Mode Select
Use this item to set COM2 port mode. The optional settings are: [RS232];
[RS422/485].
► Parallel Port Configuration
Press [enter] to make settings for the following items:
Parallel Port
Use this item to enable or disable parallel port (LPT/LPTE).
Change Settings
Use this item to select an optimal setting for super IO device.
Device Mode
Use this item to change the printer port mode.
PS2 KB/MS Connect
The optional settings are: [Keyboard First]; [Mouse First].
Case Open Select
This item is for system to detect if the case has already been opened or not. The
optional settings are: [Disabled]; [Enabled].
► PC Health Status
Press [Enter] to view hardware health status.
► Clock Generator Configuration
Clockgen Spread Spectrum
Use this item to enable or disable spread spectrum function.
IO Output Voltage
Use this item to set IO output voltage.