Jetway Computer NC9T - Manual (Page 44)

39
The optional settings are: [128M]; [256M]; [MAX].
LCD Control
Primary IGFX Boot Display
Use this item to select the video device which will be activated during POST. This
has no effect if external graphics present. 'Secondary boot display selection will
appear based on your selection. VGA modes will be supported only on primary
display.
The optional settings are: [VBIOS Default]; [CRT]; [HDMI]; [LVDS1].
*When set as [CRT]; [HDMI]; or [LVDS1], the following sub-item shall appear:
Secondary IGFX Boot Display
The optional settings are: [Disabled]; [CRT]; [HDMI]; [LVDS1].
Active LFP
The optional settings are: [Disabled]; [Enabled].
[Disable]: VBIOS does not enable LVDS.
[Enable]: VBIOS enable LVDS driver by integrated encoder.
LVDS1 Panel Type
Use this item to select LVDS panel resolution used by internal graphics device by
selecting the appropriate setup item.
The optional setting are: [640 x 480]; [800 x 480]; [800x 600]; [1024 x 600]; [1024 x
768]; [1280 x 800]; [1280 x 1024]; [1366 x 768]; [1440 x 900]; [1400 x 1050]; [1600
x 900]; [1600 x 1200]; [1680 x 1050]; [1920 x 1080]; [1920 x 1200]; [2048 x 1536].
Backlight Control
The optional settings are: [PWM Inverted]; [PWM Normal].
Panel Color Depth
Use this item to select the LVDS Panel Color Depth.
The optional settings are: [18 Bit]; [24 Bit].
► Memory Configuration
Press [Enter] to view current memory configuration, or make settings for the
following sub-items:
DIMM profile
Use this item to select DIMM timing profile that should be used.
The optional settings are: [Default DIMM profile]; [Custom profile].