Jetway Computer NC9T - Manual (Page 36)

31
► Wakeup function Settings
Press [Enter] to make settings for the following sub-items:
Wake System with Fixed Time
Use this item to enable or disable system wake on alarm event. When set as
[Enabled], system will wake on the hour/min/sec specified.
PS2 KB/MS Wakeup
The optional settings: [Enabled]; [Disabled].
Use this function to enable or disable PS/2 keyboard and mouse device to wake
up from S3/S4/S5.
This function is supported when EUP Function is set as [Disabled].
USB S3/S4 Wakeup
The optional settings: [Enabled]; [Disabled].
Use this function to enable or disable USB device to wake up from S3/S4.
This function is supported when EUP Function is set as [Disabled].
► CPU Configuration
Press [Enter] to view current CPU information and make settings for the following
sub-items:
Limit CPUID Maximum
The optional settings: [Enabled]; [Disabled].
Set as [Disabled] for Windows XP.
Execute Disable Bit
The optional settings: [Enabled]; [Disabled].
Intel Virtualization Technology
The optional settings: [Enabled]; [Disabled].
When set as [Enabled], a VHM can utilize the additional hardware capabilities
provided by Vanderpool Technology.
Hardware Prefetcher
Use this item to turn on/off the middle level cache (L2) streamer prefetcher.
The optional settings: [Enabled]; [Disabled].
Adjacent Cache Line Prefetch
Use this item to turn on/off prefetching of adjacent cache lines.
The optional settings: [Enabled]; [Disabled].