Denso PRO 60 - Manual (Page 23)

DAILY INSPECTION & MAINTENANCE
Emptying the Drain Tank
To empty the drain tank, refer to instructions, page 14.
Cleaning the Air Filters
Clean the air filters once a week. If the unit is used in a dusty environ-
ment, more frequent cleaning may be required.
A dirty air filter reduces air output resulting in a decrease of the cooling
capacity.
Filter Removal Method
➀ Turn the unit off, by pressing the COOL ON/OFF button. If a pro-
gram is running, you must first press the Program RUN button.
➁ Remove the 2 air filters.
NOTE: To remove the filters from the Office Pro 60, open the front
panel and side panel filter doors. On the side panel door, carefully
remove the filter element from the VELCRO
 attachment points. On
the front, unclip the wire frame and remove filter.
CLIP
CLIP
FILTER
WIRE FRAME
VELCRO 
ATTACHMENTS
FILTER
17