Denso PRO 60 - Manual (Page 20)

OPERATION (cont.)
Emptying the Drain Tank (If equipped)
During COOL mode, condensate will accumulate in the drain tank.
When the drain tank becomes full, the FULL TANK LED will flash and the
unit will shut off automatically.
NOTE: If you want to empty the drain tank, while the unit is in
operation, press the COOL ON/OFF button to turn the unit off. If a
program is running, you must first press the Program RUN button.
➀ Open the drain tank lid.
➁ Pull the drain tank from the unit.
➂ Remove the cap and empty the
drain tank.
➃ Replace the cap and return the drain tank to the unit.
➄ Close the drain tank lid.
➅ If the Program RUN LED is flashing, press the COOL ON/OFF button
to continue running the program. If the Program RUN LED is illumi-
nated continuously, no further steps are necessary. If no program
exists or the program was deactivated, press the COOL ON/OFF
button to restart the unit.
14