InSinkErator LC-50 - Manual (Page 7)

7
Installing the Disposer
Tighten screws evenly and firmly against backup flange.
Use shorter 1-1/8" screws if sink is more than 3/8"thick.
Turn disposer onto side and insert screwdriver into
dishwasher inlet. Knock out drain plug and remove plug from inside
of disposer.
> 3/8"
1-1/8"
< 3/8"
1-1/2"
13
14 15
Insert fiber gasket, backup ring and mounting ring. Hold
in place while inserting snap ring. Place a weight such as the disposer on the sink flange
to hold it in place. Use a towel to prevent scratching
sink. Pull snap ring open and press firmly until it snaps
into place.
11 12
OPTIONAL: DISHWASHER OR DIRECT WATER CONNECTION ONLY
If you do not need to attach the dishwasher or direction water connection, go to step 16.
Fiber Gasket
Backup Ring
Mounting Ring
Optional