Dell MX003 User Manual

Page 11

ONNECTIONS OF THE

EYBOARD

EDGE

“MX” I

NTERFACE TO THE

Version 17 only

MX003 Scanner Interfaces with a suffix of “17" are Keyboard Wedge
versions used to interface with a PC and keyboard.

1. Turn off the PC.

2. Plug the “MX” receiver adapter cable to the PC keyboard port.

3. Plug the keyboard into the “MX” receiver adapter cable.

4. Power up the PC.

Figure 3: Connecting the “MX” to a PC and keyboard

To maintain compliance with applicable standards, all circuits connected
to the unit must meet the requirements for SELV (Safety Extra Low
Voltage) according to EN 60950.

The following statement is applicable if the scanner will receive power
from a host device such as a computer system.

Caution: To maintain compliance with standards CSA C22.2 No. 950/UL

1950 and norm EN60950, the power source must meet
applicable performance requirements for a limited power
source.

“MX” Receiver adapter Cable

Optional Adapter

Host System

MS6130 with Liberty

Scanner Interface

(Transmitter)

This manual is related to the following products:

MS6130