innovaphone IP240 - Manual (Page 20)

Operating Manual IP Telephone IP240 - 18 -
- 18 -
Note 2:
Instead of menu key, it is also possible to press the consultation key “R” and
“3”.
Connecting
calls You can connect the active call with the call on hold by replacing
the handset, pressing the Loudspeaker key or the Space key.
If you have connected calls and there are no further calls in the wait
list, your telephone goes into idle state. If, on the other hand, there
are further calls in the wait list, the first call waiting will call you
once you have replaced the handset. Your telephone rings and you
can manually pick up or reject the call.
2.9.7 Overview of the short cuts
Shortcut key Description ( Mode 1) Description ( Mode 2)
Switch between the active
call and the call on hold Dial a new number
0
Reject displayed call waiting Reject displayed call waiting
1
Terminate active call; call on
hold becomes active call
2
switch between active call and
call on hold Accept waiting call
3 /
Conference mode
4
Connect active and waiting
call