Dremel 1200 - Manual (Page 3)

3
Pop-Up
Stand
Stand
release button
Tip
Glue stick
Headlight
Trigger
Getting to Know Your Glue Gun
On/Off
Switch
Indicator
Lights
Operation
With switch in the “Off” position, plug
Dremel Dual Temp Glue Gun Model 1200
into a standard 120V receptacle.
Adjust switch to low setting or high setting.
Red light will be activated to indicate
power to the unit. Insert the appropriate
glue stick into the rear opening of the glue
gun.
Allow glue gun to reach selected tempera-
ture. Green light will illuminate when
selected temperature is reached. NOTE:
As the glue gun is used, the red light will
again illuminate until the glue gun cycles
back to maximum temperature.
DM 2610933927 11-05.qxd 4/12/06 4:20 PM Page 3