Dual XDMA6415 - Manual (Page 8)

8
XDMA6415 OPERATION
Press AUDIO/MENU momentarily to select between Volume
(default), Bass, Treble, Balance, & Fader.
Press AUDIO/MENU until BAS appears then rotate volume
left/right to adjust ( -6 minimum / +6 maximum).
Press AUDIO/MENU until TRE appears then rotate volume
left/right to adjust ( -6 minimum / +6 maximum).
Press AUDIO/MENU until BAL appears then rotate volume
left/right to adjust (BAL L 12-BAL 00-BAL R 12).
BAL 00 represents equal balance
Press AUDIO/MENU until FAD appears then rotate volume
left/right to adjust (FAD F 12-FAD 00-FAD R 12).
FAD 00 represents equal fader
Press AUDIO/MENU until SUB appears, then press SELECT
to confirm. Rotate volume left/right to adjust (0-12).
Adjusting levels to 0 turns the subwoofer off.
Individual Bass and Treble settings are retained in memory
for tuner, CD, AUX, USB and iPod modes. This allows you to
save the Bass and Treble settings separately for each mode.
Note:
Any adjustment to the Bass or Treble settings automatically
cancels the current EQ curve (if one is selected).
Audio
Bass
Treble
Balance
Fader
Subwoofer
Source Audio Memory
General Operation
BASS VOLUME TREBLE BALANCE FADER SUBWOOFER