Dual XDMA6415 - Manual (Page 23)

23
XDMA6415 OPERATION
Bluetooth
®
Operation
Function Description
Making a Phone Call
Press once. An "_" will appear on the display.
Input the desired phone number using the 0-9, *, # buttons on the
remote control. Press to begin dialing.
A phone call may be placed from your mobile device using the
keypad, phone book or speed dial. When a call is placed from a
mobile device, “DIALING” will appear on the head unit display.
Last Number Dialing
To enter last number dialing mode, press , then press a second
time. The head unit will display "LAST NUMBER DIAL."
Press DISP to cycle through the received, dialed or missed call
categories. Rotate the volume knob to cycle through the last 5 calls in
the selected category.
Press to begin dialing the selected number. “DIALING” will appear
on the head unit display.
Receiving a Phone
Call
If an incoming call is detected, the head unit will automatically switch
to Bluetooth mode, muting any audio that may be playing.
The incoming phone number will scroll across the display, the phone
icon will flash on the display and a ring tone will be audible from the
vehicle speakers. See Bluetooth Settings for speaker configurations.
Note: The ring audio level will depend the mobile device and head
unit ring volume and audio settings. If the ringer on the mobile device
is off, you may not hear an incoming ring tone.
Press on the head unit to receive a call. The phone icon will
illuminate solid.
Refusing a Call To refuse an incoming phone call, press and hold for 3 seconds.
During a Phone Call
The head unit will display the elapsed time of the phone call.
The volume knob will adjust the volume of the call.
Press
momentarily to select between microphone on (MIC ON)
and microphone off (MUTE).
Audio Transfer
To transfer the phone call between the head unit and the mobile
device, press and hold DISP for 3 seconds during a call.
Tip: transfer audio to your mobile device before turning the head unit
off.
Call Waiting
When a second call is incoming, press to activate call waiting. The
current call will be placed on hold, and the second call will be active.
Press again to return to the first call.
Call Hold
During a phone call, press to place the current call on hold. To
resume the phone call, press again.
Ending a Phone Call
Hold for 3 or more seconds to end a call.
If the phone call was received, the head unit will return to previous
mode when call is ended.