IHSE USA 476 Series Draco U-Switch - Manual (Page 20)

Draco U-Switch
20 2013-04-11
The 'Hot Key' sequence to enter Command Mode can be changed. The
following table lists the 'Hot Key' Codes for the available key sequences:
'Hot Key' Code 'Hot Key'
0 Freely selectable (2012-01-12)
2 2x
3 2x
4 2x
5 2x
6 2x
7 2x
8 2x
In a KVM switch configuration, choose different 'Hot Keys' for the
KVM Extender and the Draco U-Switch.
Set freely selectable 'Hot Key' (exemplary)
In order to set a freely selectable 'Hot Key' (e.g. 2x ), use the
following keyboard sequence:
, , <0>, ,
Reset 'Hot Key'
In order to set a 'Hot Key' back to default settings of the extender, press
the key combination + within 5 s after switching on the
CON unit or plugging in a keyboard.
Pos: 20 /806-IHSE/Konfiguration/476_Externe Anzeige / Ansteuerung/476-xx @ 5\mod_1278947650839_6.doc @ 43578 @ @ 1