ifm electronic JN2301 - Manual (Page 19)

UK
Inclination sensor JN
19
Parameter Index Sub-index
Node ID 0x2000 0x00
Baud rate 0x2001 0x00
Quadrant correction 0x2040 0x00
Heating 0x2041 0x00
Teach index 0x2042 0x00
FIR filter angle 0x2043 0x00
Angle calculation 0x2044 0x00
CAN 120 Ohm resistor 0x2045 0x00
Set zero point 0x2046 0x00
The default setting of the programming key is:
j4w+CkQRKHAA/Ek=
11 Status LED
The integrated LED indicates the current device state�
LED colour Flashing frequency Description
Green Permanently on The device is in the "run" state
12 Maintenance, repair and disposal
The unit is maintenance-free�
► Dispose of the device in accordance with the national environmental
regulations�
13 Approvals/standards
The CE declaration of conformity and approvals can be found at:
www.ifm.com → Data sheet search → JN2301