Quick boot, Quite boot, Addon rom display mode – IBASE IB825 User Manual
Page 40: Bootup num-lock, Ps/2 mouse support, Wait for ‘f1’ if error, Hit message display, Interrupt 19 capture, Bios setup 36, Ib825 user’s manual
BIOS SETUP
36
IB825 User’s Manual
BIOS SETUP UTILITY
Boot
Boot Settings Configuration
Allows BIOS to skip
certain tests while
booting. This will
decrease the time
needed to boot the
system.
<-
Select Screen
↑↓
Select Item
+-
Change Field
F1
General Help
F10 Save and Exit
ESC Exit
Quick Boot
[Enabled]
Quiet Boot
[Disabled]
AddOn ROM Display Mode
[Force BIOS]
Bootup Num-Lock
[On]
PS/2 Mouse Support
[Auto]
Wait for ‘F1’ If Error
[Enabled]
Hit ‘DEL’ Message Display
Interrupt 19 Capture
[Enabled]
[Disabled]
Quick Boot
This allows BIOS to skip certain tests while booting. This will decrease the time
needed to boot the system.
Quite Boot
When disabled, this displays normal POST messages. When enabled, this
displays OEM Logo instead of POST messages.
AddOn ROM Display Mode
This allows user to force BIOS/Option ROM of add-on cards to be displayed
during quiet boot.
Bootup Num-Lock
This select the power-on state for numlock.
PS/2 Mouse Support
This select support for PS/w mouse.
Wait for
‘F1’ If Error
When set to Enabled, the system waits for the F1 key to be pressed when error
occurs. This allows option ROM to trap interrupt 19.
Hit Message Display
This displays “Press to run Setup” in POST.
Interrupt 19 Capture
This allows option ROMs to trap interrupt 19.