IBASE IB825 - Manual (Page 21)

INSTALLATIONS
IB825 User’s Manual 17
J6: COM3, COM4 Serial Port(DF11 Connector)
Signal Name Pin # Pin # Signal Name
DSR3 2 1 DCD3
RTS3 4 3 RXD3
CTS3 6 5 TXD3
RI3 8 7 DTR3
NA 10 9 Ground
DSR4 12 11 DCD4
RTS4 14 13 RXD4
CTS4 16 15 TXD4
RI4 18 17 DTR4
NA 20 19 Ground
J7: LCD Backlight Connector (DC type)
Pin # Signal Name
1 +12V
2 Backlight Enable
3 *Backlight Adj (DC type)
4 Ground
* LCD backlight brightness can be adjusted by the OS or in the
BIOS setup. In the BIOS setup, both backlight enable/disable and
backlight brightness can be configured. Also, the backlight
voltage can be set to 3.3V or 5V.
J9, J8: LVDS Connectors (DF13 type)
Signal Name Pin # Pin # Signal Name
TX0- 2 1 TX0+
Ground 4 3 Ground
TX1- 6 5 TX1+
*5V/3.3V 8 7 Ground
TX3- 10 9 TX3+
TX2- 12 11 TX2+
Ground 14 13 Ground
TXC- 16 15 TXC+
*5V/3.3V 18 17 ENABKL
+12V 20 19 +12V
Remarks: These connectors support 24-bit.
J9 is 1st channel. J8 is 2nd channel.
JP6 can be used to set 1-2 3.3V or 2-3 5V.