IBASE MI958 - Manual (Page 10)

INSTALLATIONS
Installing the Memory
The motherboard supports two DDR3 memory socket for a maximum
total memory of 8GB in DDR3 memory type.
Installing and Removing Memory Modules
To install the DDR3 modules, locate the memory slot on the board and
perform the following steps:
1. Hold the DDR3 module so that the key of the DDR3 module align
with those on the memory slot.
2. Gently push the DDR3 module in an upright position until the clips of
the slot close to hold the DDR3 module in place when the DDR3
module touches the bottom of the slot.
3. To remove the DDR3 module, press the clips with both hands.
6 MI958 User’s Manual
DDR3 Module
Loc
Loc Loc
Loc