Hummer 2010 H3 - Manual (Page 341)

Vehicle Care 10-75
8. Push, pull (A) and then try to
turn (B) the tire. If the tire moves,
use the wheel wrench to tighten
the cable.
To store the jack tool bag and jack:
1. Return the tools to the jack
tool bag.
2. Secure the tool bag to the jack
by securely wrapping the straps
around the jack. Then, slide the
straps through the rings on the
bag and secure.
3. Reinstall the wing nut retainer
to fasten the jack and tool bag
under the rear seat.
Make sure that the wing nut
passes through the tool bag and
the jack before tightening it.
4. Turn the wing nut retainer
clockwise to secure.
Tire Changing (H3)
Removing the Spare Tire and
Tools
The equipment needed is located in
the swing-gate, behind a cover. To
remove the equipment:
1. Open the tailgate. See Tailgate
on page 2‑7.
2. Lift the two latches, located on
the inside of the tailgate, to
remove the cover.