Hummer 2010 H3 - Manual (Page 332)

10-66 Vehicle Care
See Tire Changing (H3T) on
page 10‑66 or Tire Changing (H3)
on page 10‑75 for more information.
To use the wheel blocks, lift the
wheel block and lock it into place.
Use the following example as a
guide to assist in the placement of
the wheel blocks (A) when the
vehicle has a flat tire (B).
A. Wheel Block
B. Flat Tire
The following information explains
how to use the jack and change
a tire.
Tire Changing (H3T)
Removing the Spare Tire and
Tools
To access the jack and tools located
under the rear seat:
1. Turn the wing nut (A)
counterclockwise to release the
jack and tools.
2. Remove the jack and tool kit
from the bracket.
3. Release the straps (B) that
secure the tool bag to the jack.