Tripod installation – HuddleCamHD 18x User Manual
Page 14
Ver 1.2 1/26/15
Installation Instructions………………………………………………………………………
Desktop Installation………………………………………………………………………………
When using the HuddleCam on a desk, Make sure that it will stand level. If you
want to use the camera on an incline, make sure the angle is less than 15
degrees to ensure that the camera’s pan and tilt mechanism operates normally.
Tripod Installation…………………………………………………………………………………
When using the HuddleCam
with a tripod, screw the tripod to the bottom of the
camera. The tripod screw must fit below specifications:
Note: Tripod must stand on a level surface.