HuddleCamHD 18x - Manual (Page 12)

Ver 1.2 1/26/15
IR Remote Controller (Note: Some buttons do not operate for all
camera models)
1. 0ǃStandby key
After pressing the standby key,
the camera will step into standby
mode.Press again,the camera will open again.
(Note: Standby
mode power consumption is about
half of the normal mode)
2. Number key
Setting or locating presets
1. key
Key combination use
3. Set preset key:
Set preset˖
Set preset key + 0-9 number key˖
Clear preset key˖
Clear preset key + 0-9 number key
or˖ʿ+ʿ+ʿ˖clear all the presets
4. BLC control key
BLC ON˖open black light
compensation˄only work when exposure
mode setting is Auto˅
BLC OFF˖close black light compensation˄Only
available in the
exposure mode effective for Auto˅
5. Focus control key
Focusˇ˖focus length far from near
Focus
ˉ˖focus length near from far
Auto focus˖the camera focus mode is auto
Manual focus˖the camera focus mode is manual
6. Camera address selection
Select the camera which you
want to be controlled
7. # key
Key combination use
8. pan/tilt control key
Press key ˖up
Press key ˖down
Press key ˖left
Press key ˖right
“HOME” key: Return to the middle position
9. Menu setting
Open or close the OSD menu
Zoom Control key
Zoom ˖lens near
Zoom ˖lens far
10. Camera IR remote control address selection
11. Ǐ*ǐ+Ǐʿǐ+ǏF1ǐ˖Camera Address No.1
12. Ǐ*ǐ+Ǐʿǐ+ǏF2ǐ˖Camera Address No. 2
13. Ǐ*ǐ+Ǐʿǐ+ǏF3ǐ˖Camera Address No. 3
14. Ǐ*ǐ+Ǐʿǐ+ǏF4ǐ˖Camera Address No. 4